NEC ITK-8LCX-1 TEL - TALK; DISPLAY

FEATURE OPERATION
69
LOCAL PHONEBOOK
TO ADD NEW DATA
1. Press P.Book while station is in idle state.
- OR –
Display the Menu screen, and select
Directory.
2. Press “Local”.
3. Local Phonebook screen appears. Press “Add”.
4. Enter a name and press Enter key or the “OK” key.
Ex. To enter “NEC”.
Press “6” twice to enter “N”.
Press “3” twice to enter “E”.
Press “2” three times to enter “C”.
If “>>>” is pressed on the above
screen, the following soft keys appear.
Pressing Up/Down cursor key or Eu-
s/Eu-l shifts characters between
uppercase and lowercase.
To delete an entered character, press
left key or “Clr”.
To move the cursor one space to the
right, press right key or “→” once.
5. Enter the telephone number by using digit keys
and press Enter key or “OK” key.
6. “NEC” and its telephone number has been added
into Local phonebook. Two seconds later, the
display returns to Local Phonebook screen.
TO SEARCH FOR NAME
The procedure shown below is available in Local
Phonebook.
Example: To Find “NEC BNET”.
1. While Local Phonebook screen is displayed,
press “Srch”. (If no data is registered in Local
Phonebook, the message “Local Phonebook
Empty” appears.)
2. Name Entry screen appears.
3. Enter a name (in this example, “NEC” is entered)
and Press Enter key or “OK” key. (If no
appropriate data exists, the message “Entry not
found!” appears.)
If “>>>” is pressed on the above
screen, the following soft keys appear.
Pressing Up/Down cursor key or Eu-
s/Eu-l shifts characters between
uppercase and lowercase.
To delete an entered character, press
left key or “Clr”.
To move the cursor one space to the
right, press right key or “→” once.
4. A result of the search is displayed. Press
Up/Down cursor key to scroll the result.
5. The registered data for “NEC BNET” appears.
From this screen, you can make a call by going
off-hook ore pressing Speaker key.
More appears in Phonebook data
screen when the number of characters
(name) or digits (telephone number)
are exceeding displayable limit (Up to
17 characters or digits can be
displayed at a time). If the name or
telephone number exceeds the
displayable limit, press left key or More
to display the last 17 characters/digits
of the name/telephone number.