FEATURE OPERATION
70
TO EDIT AN ENTRY
Example:
To Modify Name “Home” to “House” and Telephone
Number “0123456789” to “0123456712”
1.
Press >>> twice while the target Phonebook data
is displayed.
2.
Press “EDIT” soft key.
3.
The following name edit screen appears.
4.
Press left or the “Clr” soft key two times to erase
“me”
5.
Enter “use” by using digit keys. After the
modification has completed, press Enter key or
the “OK” key.
Press “8” key twice to enter “u”.
Press “7” key four times to enter “s”.
Press “3” key twice to enter “e”.
If “>>>” is pressed on the above
screen, the following soft keys appear.
Pressing Up/Down cursor key or Eu-
s/Eu-l shifts characters between
uppercase and lowercase.
To delete an entered character, press
left key or “Clr”.
To move the cursor one space to the
right, press right key or “→” once.
6.
The following number edit screen appears.
7.
Press left key or the “Clr” soft key twice to erase
“89”.
8.
Enter “12” by pressing digit keys and then press
Enter key or the “OK” key.
9.
The data modification has completed. Two
seconds later, the display returns to Local
Phonebook screen.
TO DELETE A RECORD
1.
Press >>> soft key twice while the target
Phonebook data is displayed.
2.
Press “DEL” soft key.
3.
Press Enter key or the “OK” key to delete the
currently displaying data.
4.
The data deletion has completed. Two seconds
later, the display returns to Name Entry screen.
TO ADD A PREFIX TO TELEPHONE
NUMBER
The procedure shown below is available in Local
Phonebook.
Example:
To add a prefix “0184”in front of telephone number
“0123456789”.
1.
Press >>> soft key while the target Phonebook
data is displayed.
2.
Press “Pref” soft key.
3.
Enter a prefix (In this example, “0184” is entered)
by using digit keys and press Enter key or the
“OK” key.
To delete an entered character, press
left key or “Clr”.
4.
The prefix is added in front of the telephone
number. Once the prefix is added, “Pref” soft key
will disappear.
More appears in Phonebook data
screen when the number of characters
(name) or digits (telephone number)
are exceeding displayable limit (Up to
17 characters or digits can be
displayed at a time). If the name or
telephone number exceeds the
displayable limit, press left key or More
to display the last 17 characters/digits
of the name/telephone number.