FEATURE OPERATION
59
IF UNANSWERED
1.
After preprogrammed time, Automatic Recall is
initiated.
2.
Call Indicator lamp flashes and the user hears
Automatic Recall Ringer.
TO TRANSFER CALL
1.
During a conversation, Press Transfer. Receive
Special Dial Tone. The first party is placed on hold
and hears the music on hold.
2.
Dial the destination party’s number. Receive
Ringback Tone
3.
The destination party answers the call. Announce
the call the destination party.
4.
Replace the handset. The transfer is complete.
TO ORIGINATE A CALL USING
SELECTIVE DIALING(DYNAMIC
DIAL PAD, PRESET DIAL)
DYNAMIC DIAL PAD
1.
Enter desired telephone number (Digit keys 0-9,
* ,and #).
2.
LED on Speaker Lights. Hear key touch tone.
3.
The dialed number appears on the top of LCD.
PRESET DIAL
1.
Enter desired telephone number (Digit keys 0-9, * ,
and #).
2.
The dialed number appears on the top of LCD.
3.
Lift handset or press Speaker.
Or
Press the originating Line Key and lift handset.
Originating call operation is cancelled
by the following Soft Key operation;
- Press Exit or Cnl.
- Press Clr and cancel by one digit.
ONE-TOUCH SPEED CALLING
KEYS
TO MAKE A CALL
1.
Press the desired One- Touch Speed Calling key.
2.
Speaker lamp lights red. A call is automatically
made to a registered party.
3.
Lift the handset. Speaker lamp goes off.
TO SET
1.
Press Feature. Feature lamp lights red.
2.
Press a desired One-Touch Speed Calling key.
3.
Enter a desired telephone number or feature
access code (up to 32 digits) on the key pad.
TO VERIFY
1.
Press Feature. Feature lamp lights red.
2.
Press a desired One-Touch Speed Calling key.
3.
Display indicates the assigned number.
4.
Press Feature again. Feature lamp goes off.
To program a hook switch for transfer
or feature activation, press Recall as
first digit. (! displays on LCD.)
To program a pause, press Recall as
any digit other than the first digit. (–
displays on LCD.)
To program a Voice Call, press
Transfer after dialing station number.
(Voice displays on LCD.)
To Next Page
Loading...
