NEC ITK-8LCX-1 TEL - TO EDIT THE SHORTCUT; TO DELETE SHORTCUT; FROM A REGISTERED SHORTCUT

OPERATION
40
TO EDIT THE SHORTCUT
You can edit the registered shortcut information.
■In this function, the information can
only be edited that is set at the
shortcut registration. For example,
you can replace the contact on the
edit screen of a contact person
shortcut. If you want to edit the
contents of the contact, please refer
to “TO EDIT DATA”.
Also, the shortcut types cannot be
edited using this method. Only the
shortcut information registered by
entering can be edited.
To change the shortcut type, delete
the shortcut and register again. For
register or delete shortcut, refer to
"TO RESISTER SHORTCUT" or "TO
DELETE SHORTCUT".
■The Redial shortcut cannot be edited.
1. Select a registered shortcut
Select a registered shortcut by long press (long
tap).
HOW TO SELECT BY LONG PRESS
■ DT930 (24CG)
Use the cursor keys to move orange
focus to a desired shortcut and long
press the enter key.
■DT930 (Touch Panel model)
Long press the shortcut. Only when the
item is selected, the orange focus is
displayed for about 1 second.
■DT920 (Self-Labeling model)
Long press programmable key on the
sides of screen.
2. Select “Edit shortcut”
The option menu is displayed, select “Edit
shortcut”.
3. Select data
Data select screen is displayed. Select data that
needs to be edited.
4. Edit the data
Edit the registered information, and press enter
or the local soft key 4.
5. The information is refreshed
If editing is completed, the following screen is
displayed, and the screen returns to the
Favorite screen after a second.
TO DELETE SHORTCUT
There are 2 ways to delete shortcuts. One is from a
registered favorite screen, the other is from user
settings. From the user menu, it is possible to
delete some shortcuts, or all shortcuts from user
settings.
FROM A REGISTERED SHORTCUT
Following explains how to delete shortcut one by
one. For example, following is a case of deletion of
Phonebook user shortcut or dial number shortcut.
1. Select registered shortcut.
Select a registered shortcut by long press (long tap).
HOW TO SELECT BY LONG PRESS
■ DT930 (24CG)
Use the cursor keys to move orange
focus to a desired shortcut and long
press the enter key.
■DT930 (Touch Panel model)
Long press the shortcut. Only when the
item is selected, the orange focus is
displayed for about 1 second.
■DT920 (Self-Labeling model)
Long press programmable key on the
sides of screen.
2. Select “ 2 Delete shortcut”.
The option menu is displayed, select “Delete shortcut”.