NEC ITK-8LCX-1 TEL - Page 42

TERMINAL SETUP
33
The IP address input screen can be
switched to URI input screen by the
Soft key (IP/URI).
 Press Soft Key (IP/URI)
 Press Soft Key (IP/URI) again
to go back to the IP address
input screen.
16. Select “ 2 Data Restore”
17. Enter the file name by digit keys.
The default name is displayed.
 Press Soft key (BK) once to delete the
default file name.
 Enter the file name that backed up in the
TO BACKUP THE SETTING DATA OF
TERMINAL.
Please refer to “HOW TO INPUT
CHARACTERS” for how to enter the
character.
Up to 64 characters can be entered as
a file name.
When you send to a terminal the date
from the server, it is possible to select
the file format with encryption. Press
Soft Key (Enc) to send the file with
encryption.
Press Soft key (No Enc) to send the file
without encryption.
Do not change the extension of backup
file. The setting data of the terminal
can only be backed up as a (.tgz) /
(.tgz.ef) file.
18. Press Soft key (Exec).
Downloading is started.
19. Press Soft key (Exit).
The display goes back to the
[Backup/Restore] screen.
When the backup process ends in
failure, “Download Failed!” is displayed
on the LCD. Check to see the following
points and retry backup.
CHECK POINTS
ACTIONS
Check whether the
download file is placed
in the folder of the
server or not.
Place the download
file in the specified
folder of the server.
Check if the file name
you entered is match
with that stored in
FTP/TFTP/HTTPS
server.
Enter the correct file
name which is stored
in FTP/TFTP/HTTPS
server.
Is a download file a
terminal data file of the
same model?
Terminal data of the
different model can’t
be downloaded.
Please download
terminal data of the
same model.
Check whether IP
address/address (URI)
of FTP/TFTP/HTTPS
server is correct or not.
Set the proper IP
address/address
(URI) of
FTP/TFTP/HTTPS
server.
Check whether the
power to
FTP/TFTP/HTTPS
server and network
equipment is ON or
not.
Turn on the power.
Check whether the
LAN cable is
connected securely.
Reconnect the cable
securely.
If the retry of downloading fails many
times, the terminal may be in failure.
For details, please contact the system
administrator.
Other than above conditions, if
"Download Failed!" or "Upload Failed!"
is displayed, please contact the system
administrator.