NEC NEAX 2000 IPS - Service Conditions; Programming Procedure

CHAPTER 1 MAINTENANCE SERVICE FEATURES
– 103 – NWA-008847-001 Rev.3.0
a6ch1001.fm
Service Conditions
(1) Number of lost packets, CODEC type, and Payload size are displayed with pressing the Function key
that has been set during a communication.
(2) The displayed QoS information on the LCD is updated every 5 seconds.
(3) All information sent from the PBX is not displayed while the QoS information is displayed on the
LCD.
(4) To stop the display of QoS information, press Soft key of Exit. If you do not that, the QoS
information will keep being displayed.
(5) This feature is available for the D
term
IP version 2.81 or later.
Programming Procedure
DESCRIPTION DATA
Assign the QoS Display key to the D
term
IP. •
(1)
(2)
Y=00
My Line No. + + Key No.
F1058: QoS Display on
D
term
IP
START
CM90
,
END
OCTOBER/14/2005
QoS DISPLAY ON D
term
IP