CHAPTER 3 MAINTENANCE OPERATION
– 244 – NWA-008847-001 Rev.3.0
a6ch3001.fm
UPLOADING DATA / VERIFYING DATA
The following procedure explains how to upload archived data from your PC into PBX’s memory and how
to compare archived PBX data on your PC against current data in the PBX’s memory.
Uploading data is helpful for backup purposes to restore PBX data from your PC.
NOTE: This procedure requires a direct connection to the PBX. Do not attempt to perform this proce-
dure if you are connected to the PBX through a PC modem.
Verifying data is helpful to determine if differences exist between the PBX’s memory and the backup file
on your PC.
For hardware connection of MAT and PBX and for MATWorX software installation, refer to the MAT-
WorX Installation Guide.
STEP1: After starting up the MATWorX, select PBX Connect from the taskbar. And follow Con-
figuration Wizard dialog to make the connection to the PBX.
STEP2: Select System Save/Load/Verify from the taskbar and click Load/Verify tag. The follow-
ing is displayed. Click .
Click this button
UPLOADING DATA / VERIFYING DATA
To Next Page
Loading...
