CHAPTER 1 MAINTENANCE SERVICE FEATURES
– 60 – NWA-008847-001 Rev.3.0
a6ch1001.fm
Operating Procedure
• To display fault messages and clear the alarms of PBX
Operation:
Use Fault Display Add-In of MATWorX.
See Operating Procedure in “FAULT MESSAGE”. Page 21
• To display the PBX number set to each Point Code
Operation:
Use MOC Add-In of MATWorX.
For operation of Centralized MAT, refer to the Centralized MAT User Guide.
DE
+
E303>
E303
ST COMMAND=
DE
+
XXXXX : XXXX
XXXXX
(Point Code)
PBX No.
Point Code
CENTRALIZED MAT
To Next Page
Loading...
