NEC NEAX 2000 IPS Maintenance Manual

CHAPTER 1 MAINTENANCE SERVICE FEATURES
– 105 – NWA-008847-001 Rev.3.0
a6ch1001.fm
Programming Procedure
The following explains the procedures for command operation from CAT/MAT.
• CME4 Y=00 (Readout service setting status for each station A)
• CME4 Y=01 (Readout service setting status for each station B)
ST COMMAND=
+
DE
+ E400>E400
DE
X~XXXXXXXX : abcdefgh
X~XXXXXXXX
(Station Number)
a : Terminal connection status
b : Make Busy
c : Line status
d : Call Forwarding-All Calls
e : Call Forwarding-Busy Line
f : Call Forwarding-Don't Answer (No Answer)
g : Logout/Call Forwarding-PS out of cell (zone)
h : Do Not Disturb
For details of abcdefgh, refer to Table A
(Readout Service Setting Status for Each Station A).
Station Number
Page 106
ST COMMAND=
+
DE
+ E401>E401
DE
X~XXXXXXXX : ijklmnop
X~XXXXXXXX
(Station Number)
i : Mobility access (Station Access/Call Forwarding)
j : Day/Night mode change
k : Number Sharing
l : Split Call Forwarding-All Calls
m : Split Call Forwarding-Busy Line/Don't Answer (No Answer)
n : ACD/UCD Busy Out (UCDB)
o : Outgoing Call Restriction
p : Not used
For details of abcdefgh, refer to Table B
(Readout Service Setting Status for Each Station B).
Station Number
Pa
g
e 107
JULY/01/2006
STATION SERVICE STATUS DISPLAY

NEC NEAX 2000 IPS Specifications

General

Brand	NEC
Model	NEAX 2000 IPS
Category	Server
Language	English