NEC NEAX 2000 IPS - Station Line Status Display; General Description; Service Conditions; Programming Procedure

CHAPTER 1 MAINTENANCE SERVICE FEATURES
– 32 – NWA-008847-001 Rev.3.0
a6ch1001.fm
STATION LINE STATUS DISPLAY
General Description
This feature displays the line status for a single line telephone or a D
term
using the CAT or the MAT.
Service Conditions
(1) This feature is not available when the system is off-line.
(2) When performing this feature for a single line telephone, this feature may affect the status of the other
telephone in the same line circuit card. Therefore, use this feature only when a line fault has occurred
(do not use under a normal state).
Programming Procedure
No programming is required.
Operating Procedure
Operation:
Explanation of Screen Information:
Station Number: X-XXXXXXXX (1-8 digits)
EC1
DE
+
EC1>
ST COMMAND=
X-XXXXXXXX
DE
+
XXXXXXXX : XX XX XX
(Station No.)
XXXXXXXX : XX XX XX
4
2
1
3
1
STATION LINE STATUS DISPLAY