NEC NEAX 2000 IPS - Lamp Indication on Circuit Cards

CHAPTER 2 TROUBLESHOOTING
– 127 – NWA-008847-001 Rev.3.0
a6ch2001.fm
Lamp Indication on Circuit Cards
Lamp Indications on Circuit Cards
Continued on next page
NOTE: L0 lamp shows the status in an MP program remote download.
KIND OF
CIRCUIT CARD
CARD NAME
LAMP
NAME
COLOR
INDICATIONS
NORMAL ABNORMAL
Control Cards PN-CP24-A/
PN-CP24-B/
PN-CP24-C/
PN-CP24-D
(MP)
RUN Green 120 IPM Flash Steady ON or OFF/
Flash slowly
L0 Green 240 IPM Flash/
60 IPM Flash/
Flash specially
(ON: OFF=
7: 3)/Steady ON
or OFF
120 IPM Flash
NOTE
PN-CP27-A/
PN-CP27-B
(MP)
RUN Green 120 IPM Flash Steady ON or OFF/
Flash slowly
PN-CP31-A/
PN-CP31-B/
PN-CP31-C/
PN-CP31-D
(MP)
RUN Green 120 IPM Flash Steady ON or OFF/
Flash slowly
L0 Green 240 IPM Flash/
60 IPM Flash/
Flash specially
(ON: OFF=
7: 3)/Steady ON
or OFF
120 IPM Flash
NOTE
PZ-M606-A
(ETHER)
LINK Green Steady ON OFF
PN-CP15
(FP)
RUN Green 120 IPM Flash Steady ON or OFF
PN-PW00
(EXTPWR)
RUN Green Steady ON OFF
PZ-PW121
(AC/DC PWR)
MJ Red OFF Steady ON
MN Yellow OFF Steady ON
ON Green Steady ON OFF
JULY/01/2006
FAULT DETECTION