CHAPTER 2 TROUBLESHOOTING
ā 192 ā NWA-008847-001 Rev.3.0
a6ch2001.fm
Remedial Action on Each Lamp Status
Continued on next page
CARD NAME
LAMP
STATUS
FAULT
CONTENT
REMEDIAL ACTION
PN-IPTB
(IPT)
[PZ-M567]
LINK lamp is not
on
LAN connection
failure
Check to see if the LAN cable is
correctly connected.
Confirm the condition of the LAN
device connected to the IPT.(ex.
Power of HUB)
Confirm whether the MODE switch
is set to 0.
When the fault cannot be cleared
by to above, set the MODE to
1, and set the baud (100 Mbps or 10
Mbps) by the SW2-1 switch accord-
ing to the LAN device.
If the fault cannot be cleared,
replace the card.
1
2
3
4
1 3
5
FAULT DIAGNOSIS AND TROUBLESHOOTING
To Next Page
Loading...
