EasyManua.ls Logo

NEC PH2601QL - ⓫ Controlling The Projector By Using An Http Browser

NEC PH2601QL
173 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
45
3. Convenient Features
Controlling the Projector by Using an HTTP Browser
Overview
Usingthewebbrowseronthecomputer,theHTTPserverscreenoftheprojectorcanbedisplayedtooperatethe
projector.
PossibleoperationsontheHTTPserverscreen
• Congurethesettingsrequiredforconnectingtheprojectortothenetwork(wiredLAN).(NETWORKSETTINGS)
• Conguretheemailnotication.(ALERTMAIL)
Whentheprojectorisconnectedtoanetwork(wiredLAN),noticationsonvariouserrorsaresenttotheemail
address that has been set up.
• Operatetheprojector.
Operationssuchpoweron/offoftheprojector,inputterminalswitchover,picturecontrol,andlenscontroletc.can
be carried out.
• Congurethe[PJLinkPASSWORD]and[AMXBEACON]etc.
ToviewtheHTTPserverscreen
1. ConnecttheprojectortothecomputerwithaLANcablesoldcommercially.
ConnecttheLANcabletotheLANportorHDBaseTportoftheprojector.( page 10)
2. Select[SETUP][NETWORKSETTINGS][WIREDLAN]intheon-screenmenutoconfigurethenetwork
settings. ( page 107)
3. StartupthewebbrowseronyourcomputerandentertheaddressorURLintheinputfield.
SpecifytheaddressorURLas“http://<IPAddressofProjector>/index.html”.
The basic HTTP server screen will be displayed.
TIP:ThefactorysettingIPaddressis[DHCPON].
NOTE:
• Tousetheprojectorinanetwork,consultwithyournetworkadministratoraboutnetworksettings.
• Thedisplay’sorbutton’sresponsecanbesloweddownoroperationmaynotbeaccepteddependingthesettingsofyournetwork.
Shouldthishappen,consultyournetworkadministrator.Theprojectormaynotrespondifitsbuttonsarerepeatedlypressedin
rapidintervals.Shouldthishappen,waitamomentandrepeat.Ifyoustillcan’tgetanyresponse,turnoffandbackontheprojec-
tor.
• IfthePROJECTORNETWORKSETTINGSscreendoesnotappearinthewebbrowser,presstheCtrl+F5keystorefreshyourweb
browser(orclearthecache).
• Thisprojectoruses“JavaScript”and“Cookies”andthebrowsershouldbesettoacceptthesefunctions.Thesettingmethodwill
varydependingontheversionofbrowser.Pleaserefertothehelplesandtheotherinformationprovidedinyoursoftware.
Preparation before Use
ConnecttheprojectortoacommerciallyavailableLANcablebeforeengaginginbrowseroperations.(page10)
Operationwithabrowserthatusesaproxyservermaynotbepossibledependingonthetypeofproxyserverandthe
settingmethod.Althoughthetypeofproxyserverwillbeafactor,itispossiblethatitemsthathaveactuallybeenset
willnotbedisplayeddependingontheeffectivenessofthecache,andthecontentssetfromthebrowsermaynotbe
reectedinoperation.Itisrecommendedthataproxyservernotbeusedunlessitisunavoidable.

Table of Contents

Other manuals for NEC PH2601QL

Related product manuals