NEC PH2601QL - ❿ Indicator Messages

149
8. Appendix
❿ Indicator Messages
Thissectionhelpsyouresolveproblemsyoumayencounterwhilesettinguporusingtheprojector.
POWERIndicator
Indicatordisplay Projector status Procedure
Off Power is off. –
Flashing
Green(shortashes) Preparingtopoweruporcoolingthemain
unit
Whentheprojectorisinthestandbystate,
thermwareisreadytobeupdated
Waitawhile.
Green(twicepercycle) Firmwareisreadytobeupdated –
Green(longashes) Offtimer(enabled)
Programtimer(offtimeenabled)
–
Orange(longashes) Programtimer(ontimeenabled) –
Lit Green Power on –
Orange
Standbymode –
STATUS Indicator
Indicatordisplay Projector status Procedure
Off No problem –
Flashing
Green(short
ashes)
Shutterisclosed –
Green(long
ashes)
Poweron(Thelightmod-
ule is turned off.)
–
Orange Button has been pressed
while projector is in key
lockmode
Theprojector’skeysarelocked.Thesettingmustbecan-
celedtooperatetheprojector.(→page36, 104)
Projector’s ID number
and remote control’s ID
number do not match
CheckthecontrolIDs.(→pages105)
Projectorcooling Waitawhile.
Red Erroroccurring Contactyourdistributororservicepersonnel.Letusknow
thedetailsdisplayedontheliquidcrystalindicatorpanel
then.
Lit Green Power on –
Orange
Standbymode –
Red
Error requiring service
support
Askyourdistributororservicepersonnelforrepair.Letus
knowthedetailsdisplayedontheliquidcrystalindicator
panel then.