NEC PowerMate V486 Series - SIMM Upgrade Kits

5-22 Adding Options
SIMM UPGRADE KITS
Your system supports the following 32-bit SIMM
configurations:
■ 1-MB by 32-bit (4-MB stick)
■ 2-MB by 32-bit (8-MB stick)
■ 4-MB by 32-bit (16-MB stick)
■ 8-MB by 32-bit (32-MB stick).
PowerMate V486 Series systems also support 36-bit parity
SIMMs. (You must remove all 32-bit non-parity SIMMs
before you can add 36-bit parity SIMMs.)
!
CAUTION: To avoid corrosion between
different metals, only use tin-plated SIMM sticks.
SIMM sticks must have a speed of 70 nanoseconds
(ns). Slower SIMMs are not supported.
SIMM sticks are installed in two SIMM sockets on the
system board and increase the total system high-speed
memory. The system supports up to 64 MB of high-speed
memory.
Use the following procedures to install a SIMM stick.
!
CAUTION: Static discharge can
damage SIMM components. Heed the cautions in
the following section.