Setting System Parameters 2-25
!
CAUTION: Use the following informa-
tion to run mouse drivers for MS-DOS. The infor-
mation is not appropriate for using your mouse in
Windows.
The MS-DOS mouse driver is LMOUSE.COM and works
with all applications that use the Microsoft mouse driver.
To run LMOUSE.COM, you must be in the Windows di-
rectory where it is located, or you must include the mouse
software directory in your PATH statement. Then, at the
MS-DOS prompt, type
LMOUSE and press Enter.
NOTE
You can include the LMOUSE command
in an AUTOEXEC.BAT file.
Changing Mouse Parameters
Use the mouse parameters to change the function of the
mouse and the way that your screen cursor responds to
mouse movement. You can combine any number of parame-
ters when loading the mouse drivers.
The parameters described in the following section are com-
mon to all types of Logitech mice. If you have another type
of mouse, parameters may vary.
Command Line Options
The syntax for setting mouse parameters using a DOS
command line is as follows:
LMOUSE parameter parameter...
To Next Page
Loading...
