Setting System Parameters 2-5
The Menu Bar
The menu bar at the top of the Main Menu window lists
these menus:
■ Main — Use this menu for basic system configuration.
For example, select “Main” to set the system time,
system date, diskette drives, and video parameters.
Use this menu to check memory parameters.
■ Advanced — Use this menu to set serial port and
printer port addresses and interrupts, to enable/disable
the system’s diskette drive controller and dual-IDE
controllers.
The Advanced menu also provides menu items for
setting parity and for setting parameters for large disks
(for example, to use large disks with Windows NT™).
Some of the Advanced features are accessible only with
a Supervisor password when the Supervisor password is
set.
■ Security — Use this menu to set User and Supervisor
Passwords and the Backup and Virus-check reminders.
■ Power — Use this menu to configure Power
Management features.
■ Exit — Use this menu to exit the current menu.
To select an option from the menu bar, use the left and right
←← →→ arrow keys.
See “Exiting Setup” in this chapter for a description on
exiting the Main Menu.
To Next Page
Loading...
