2-20 Setting System Parameters
THE POWER MENU
Selecting “Power” from the menu bar displays a screen
with the power management parameters described in the
following table.
A power management system reduces the amount of energy
used after specified periods of inactivity. The Power menu
supports a Full On state, a Standby state with partial power
reduction, and a Suspend state with full power reduction.
See “Power Management” in Chapter 1 for additional
information about managing power.
Use the Power menu to specify your settings for Power
Management. Use the following table to make your
selections.
NOTE
To disable all power management
features, set APM (advanced power management)
to Disabled. See the following table to set power
management parameters.
Power Management Parameters
FEATURE OPTIONS DESCRIPTION
APM Enabled (default)
Disabled
APM (advanced power management)
allows APM-aware software to better
manage power savings.
Power
Management
Mode
Customize (default)
Disabled
Maximum
Medium
Minimum
Maximum, Medium, and Minimum
set power-management options with
predefined values. Select Customize
to select your own level of power
management.
Standby
Timeout
15 min (default)
Disabled
User selectable
Inactivity period required before
partial power shutdown.
To Next Page
Loading...
