Solving Problems 7-11
EMERGENCY EJECT
Use the following procedure to manually remove a disc
from the CD-ROM reader if the eject function is disabled
by software or a power failure occurs.
1. Turn off system power.
2. Locate the Emergency Eject hole. This opening allows
access to a screw inside the reader for manual control of
the eject/retract CD functions.
3. Insert a very thin flat-tipped screwdriver into the hole
and align it with the screw. Turn the screwdriver
counterclockwise to manually eject the tray.
To manually retract the tray, turn the screwdriver
clockwise.
Emergency eject hole on the CD-ROM reader
To Next Page
Loading...
