5-82 Adding Options
Connecting the Microphone
Connect the microphone to your system as follows:
1. Plug the microphone cable connector into the
microphone in jack on the rear of the system.
2. Mount the microphone (see the following figure).
■ Remove the center and the backing from one side of
the adhesive pad that comes with the microphone.
Attach the pad to the microphone holder.
■ Remove the backing from the other side of the adhe-
sive pad and attach it to where you wish to keep the
microphone (on your computer, for example).
■ Slide the microphone into the holder.
Setting up the microphone
To Next Page
Loading...
