2-18 Setting System Parameters
See the following table for a description of the security
features you can select. Use the legend keys to make your
selections and exit to the Main Menu.
System Security Options
FEATURE OPTIONS DESCRIPTION
Supervisor Password Disabled (default)
Enabled
Must set to Enabled to set a
Supervisor password.
Set Supervisor
Password
Up to seven
alphanumeric
characters
Pressing Enter displays a dialog
box for entering the supervisor
password. This password gives
FULL access to Setup menus.
User Password Disabled (default)
Enabled
Must set to Enabled to set a User
password.
Set User Password Up to seven
alphanumeric
characters
Pressing Enter displays the
dialog box for entering the user
password. This password gives
RESTRICTED access to Setup
menus. Requires the prior setting
of a Supervisor password.
Password on Boot Disabled (default)
Enabled
Enabled requires a password on
boot (cold boot only — no
password required for warm boot).
Requires the prior setting of a
Supervisor and/or User password.
If disabled, password(s) are
required for entering Setup but
are not required for booting.
If a Supervisor password is set
and this option is disabled, the
BIOS boots without asking for a
password.
Diskette Access User (default)
Supervisor
Supervisor setting restricts
the use of diskette drives to a
supervisor. Requires setting the
Supervisor password.
To Next Page
Loading...
