NEC PowerMate V486 Series - Page 88

Setting System Parameters 2-21
Power Management Parameters
FEATURE OPTIONS DESCRIPTION
Suspend
Timeout
15 min (default)
Disabled
User selectable
Inactivity period required after
Standby to Suspend (maximum
power shutdown).
Video Off in
Standby
Enabled (default)
Disabled
Enabled turns monitor off in Standby
mode.
Standby CPU
Speed
Max (default)
High
Medium
Low
Sets the processor speed during
Standby.
Suspend
Button
Suspend (default)
Standby
Disabled
Suspend allows the system to enter
Suspend mode when the suspend
button is pressed. Standby enables the
system to enter Standby mode when
the suspend button is pressed.
Parallel Port
Activity
Enabled (default)
Disabled
Enables parallel port activity by
resetting the timer and bringing the
system to full power when it is in a
low power management mode.
Serial Port
Activity
Enabled (default)
Disabled
Enables serial port activity by
resetting the timer and bringing the
system to full power when it is in a
low power management mode.
IRQ0...IRQ15 Disabled
Enabled
During Suspend, enabled IRQ turns
on processor clock.