Adding Options 5-27
!
CAUTION: Be sure to install SIMMs in
the correct sockets. Refer to the previous figures
and table when you install a SIMM.
1. Remove the SIMM in SIMM socket 1:
NOTE
If you are installing a SIMM in socket 2,
first remove the SIMM in socket 1. SIMM socket 1
must be empty before you can access socket 2.
■ Press the metal clips at the outer edges of the socket
away from the SIMM (see the following figures).
■ Push the SIMM away from the locking tabs and
remove it from the socket.
Removing a SIMM
To Next Page
Loading...
