17
2. Projecting an Image (Basic Operation)
About the language of the on-screen menu
When you turn on the power for the rst time after purchase, the on-screen menu is displayed in English. The display
language of the on-screen menu can be changed by selecting [SETUP] → [LANGUAGE] on the on-screen menu.
NOTE:
• If one of the following things happens, the projector will not turn on.
- If the internal temperature of the projector is too high, the projector detects abnormal high temperature. In this condition the
projector will not turn on to protect the internal system. If this happens, wait for the projector’s internal components to cool
down.
- If the STATUS indicator lights orange with the POWER button pressed, it means that the [CONTROL PANEL LOCK] is turned
on. Cancel the lock by turning it off. (→ page 69)
• While the POWER indicator is blinking blue in short cycles, the power cannot be turned off by using the POWER button.
To Next Page
Loading...
Need help?
General
