NEC PX2201UL - Installation and Connections; Connecting to Other Equipment

71
5-1. Connecting to Other Equipment
Below is an example of connections to external equipment.
No connection cables are included with this projector. Use the appropriate cables for the connections.
CAUTION
• Be sure to turn off the projector before connecting the projector to an external device. In doing so, do not enter
the radiation zone (HD). If projected light enters your eyes, it may cause visual impairment.
NOTE:
• For HDMI, DisplayPort, BNC, and RS232C, please use a shielded cable.
For 15-pin mini D-Sub and DVI-D, please use a shielded signal cable with ferrite core.
Use of other cables may cause interference with radio and television reception.
2
1
3
3
4
5
6
Computer, etc. Blu-ray player, etc.
HDBaseT transmission device, etc.
Professional video equip-
ment, etc.
Professional video equipment, etc.
Computer, etc.
5. Installation and Connections