18
2. Projecting an Image (Basic Operation)
2-4. Selecting a Source
Selecting the computer or video source
NOTE:
• Turn on the computer or video source equipment connected to the projector.
Using the Direct button on the remote control
Press the Direct button on the remote control.
Select the input according to the connection terminal.
Input connector Button on the remote
control
HDMI 1 IN HDMI1
HDMI 2 IN HDMI2
DisplayPort IN DP1
DVI-D DVI
3G/HD/SD-SDI IN SDI, AUX
HDBaseT/LAN HDBaseT
COMPUTER IN COMP.
BNC IN CTL + DP1
To Next Page
Loading...
