30
3. Convenient Features
3-1. Turn off the light of the projector (LENS SHUTTER)
Press the SHUTTER button.
The light source will turn off temporarily.
Press again to allow the screen to become illuminated again.
• Press the SHUTTER CLOSE ( ) button on the remote control.
Press the SHUTTER OPEN ( ) button to allow the screen to become
illuminated again.
TIP:
• The video will disappear but not the menu display.
3-2. Turning Off the On-Screen Menu (On-Screen Mute)
Hold down the CTL button on the remote control and press the OSD
CLOSE ( ) button.
The on-screen menu, input terminal, etc. will disappear.
• To display the on-screen display, press the OSD OPEN ( ) button
while holding down the CTL button on the remote control.
TIP:
• To confirm that the on-screen mute is turned on, press the MENU button. If the on-screen menu is not displayed even though
you press the MENU button, it means the on-screen mute is turned on.
• The on-screen mute is maintained even when the projector is turned off,
• Holding down the MENU button on the projector cabinet for at least 10 seconds will turn off the on-screen mute.
To Next Page
Loading...
Need help?
General
