Chapter 8 Disk Array Configuration Setting (S100/S1100/S1200/S1300/S2100/S2200/S2300)
IV-136
Figure 8-34 Special Screen (S400/S1400/S2400/S2800)
(A) Cross Call
Refer to 8.5.1 "Cross Call and Auto Assignment".
(B) Spare
Can set the data rebuild operation when one of the physical disks configuring logical disks fails.
y Auto Repair: The repair operation is automatically started when unused spare disks exist.
y Manually Repair: Placed in the rebuild wait state without automatically performing repair operations.
When placed in the rebuild wait state, the repair start instruction can be given on the RANK/Spare Screen.
(C) Expand LUN
Refer to 0 "
Expand LUN".
(D) Change Time
Refer to 9.5 "Setting Disk Array Time".
(E) Get Log
Refer to 9.6 "Getting Log in the Disk Array".
(D)
(E)
To Next Page
Loading...
