Chapter 10 Access Control Operations
IV-200
Application of the New Setting invalidates all of the current assignment settings for the logical disks and new
assignment settings for the logical disk immediately reflect on the Disk Array. Therefore, if setting information is
wrong, the business server suddenly stops recognizing the logical disk in use. It is necessary to perform this
operation after checking the operation state. Furthermore, stop business or the business server according to the
necessity.
If the [New Setting] operation fails, the error dialog screen showing the failure will be displayed.
When an operation request is in error, there is a possibility of inconsistency between the disk array setting information
and the information administrated on the iSM client. Therefore, click [Get Disk Array Info.].
To Next Page
Loading...
