Appendix B Configuration Setting Command
8
Unit Name : Storage2300
Unit Location : Fuchu-shi
Unit Info : Setting Date 2003/01/01
The display items are as follows:
(a) Service Processor Information
Displays the information of a target Service Processor.
Number(h): Service Processor number
State: Service Processor state
(b) Disk Array TCP/IP Information
Displays the TCP/IP information of a target disk array.
IP Address: IP Address of the disk array
Subnet Mask: Subnet Mask of the disk array
Gateway Address: Gateway Address of the disk array
(c) SCSI Socket Information
Displays the information of monitoring servers.
SCSI Socket Guard Invalid: Indicates that the limit for access from monitoring servers
connected through Ether is valid/invalid.
on: The limit for access from monitoring servers
connected through Ether becomes invalid, and
monitoring servers at any IP Addresses are permitted
to make access.
off: The limit for access from monitoring servers
connected through Ether becomes valid, and only
monitoring servers at registered IP Addresses are
permitted to make access.
SCSI Socket Valid IP Address: IP Address of a monitoring server that is permitted to make
access. ā---ā is displayed if no IP Addresses are registered.
To Next Page
Loading...
