Chapter 7 Disk Array Configuration Setting
IV-10
(3) Selecting the pool type
Clicking the [Next] button on the “Welcome to the Pool Binding Wizard” screen displays the “Pool Selection”
screen.
Figure 7-3 Selecting Pool Type
You can bind a pool of either of the following types with a fixed RAID configuration:
Dynamic: RAID6 (8+PQ) or RAID6(4+PQ) is allowed.
The dynamic pool and its logical disks are easy to expand.
Basic: RAID1, RAID10, RAID5, or RAID50 is allowed.
It is not allowed to expand any basic pool and its logical disks.
[Next] button: Displays the “RAID Type Selection” screen.
[Back] button: Displays back the “Welcome to the Pool Binding Wizard” screen.
[Cancel] button: Displays a confirmation to ask whether you want to quit the wizard, then the wizard closes
if agreed.
To Next Page
Loading...
