VM8000 Issue 1.0
InMail System Guide 3 - 27
47-02-12 System Administrator (System Admin)
Use this option to designate the Subscriber Mailbox as a System
Administrator. This allows the subscriber to use the SA options after logging
on to their mailbox.
See System Administrator on page 2-231 for more.
Options
1 (Yes - enabled)
0 (No - disabled)
Default
Mailbox 1 (101) = Enabled (1)
All other mailboxes = Disabled (0)
47-02-13 Dialing Option (Dialing Option)
Dialing Option provides additional dialing options for Next Call Routing
Mailbox calls (see Next Call Routing Mailbox below). If enabled, a caller
who accesses the Subscriber Mailbox to leave a message can dial any
option in the Next Call Routing Mailbox’s Dial Action Table. If disabled, the
caller can only dial 0 (to use the Next Call Routing Mailbox 0 action).
See Next Call Routing Mailbox on page 2-193.
Options
1 (Yes - enabled)
0 (No - disabled)
Default
0 (No - disabled)
47-02-14 Next Call Routing Mailbox (Next CR Mbox)
Use this option to assign a Next Call Routing Mailbox to the Subscriber
Mailbox. This provides callers with additional dialing options while listening
to a Subscriber Mailbox recorded or default greeting. The digits the caller
can dial depends on the setting of the Next Call Routing Mailbox and
Alternate Next Call Routing Mailbox options.
For a detailed explanation of the interaction of these two programs, turn to Dialing
Options while Listening to a Subscriber Mailbox Greeting on page 2-194.
For an explanation of the options a caller can dial while recording, see Record
and Send a Message on page 2-207.
See the following features for more:
N
Auto Attendant Do Not Disturb on page 2-39.
N
Call Forward to a Mailbox on page 2-53.
N
Exiting a Mailbox on page 2-89.
N
Leaving a Message on page 2-131.
N
Next Call Routing Mailbox on page 2-193
To Next Page
Loading...
