NEC Univerge SV8100 VM8000 InMail - Page 42

Issue 1.0 VM8000
2 - 14 Features
Programming
 41-08-03 Delay Announcement Source Type
Set ACD Delay Announcement source to In-Mail.
Options:
0 = ACI (V1100 or higher is required)
1 = VRS
2 = In-Mail (V2000 or higher is required)
Default:
0
 41-19-01 Delay Message Start Timer
Determine how long the system waits before playing the Delay Message.
Options:
0~64800
Default:
0
 41-19-02 Mailbox Number for 1st Announcement Message
Assign Voice Mail ACD Announcement Mailbox as the message source for
the 1st Announcement Message.
Options:
Dial (Up to 8 digits)
Default:
No Setting
 41-19-03 1st Delay Message Sending Count
Determine the 1st Delay Message Sending Count. This entry must be set to
1 or higher in order for the message to play.
Options:
0 = No Message Played, 1~255
Default:
0
 41-19-04 Mailbox Number for 2nd Announcement Message
Assign Voice Mail ACD Announcement Mailboxes as the message source
for the 2nd Announcement Message.
Options:
Dial (Up to 8 digits)
Default:
No Setting