NEC Univerge SV8100 VM8000 InMail - Page 43

VM8000 Issue 1.0
InMail System Guide 2 - 15
 41-19-05 2nd Delay Message Sending Count
Determine the 2nd Delay Message Sending Count. This entry must be set
to 1 or higher in order for the message to play.
Options:
0 = No Message Played, 1~255
Default:
0
 41-19-06 Wait Tone Type at Message Interval
Determine what the caller will hear between the messages.
Options:
0 = Ring Back Tone
1 = MOH Tone
2 = BGM Source
Default:
0
 41-19-07 ACD Forced Disconnect Time After 2nd Announcement
Assign how long the system should wait after the end of the ACD delay
message before disconnecting.
Options:
0~64800
Default:
0
 41-19-08 Delayed Message Interval Time
Set the timer for the interval between the Delayed Messages
Options:
0~64800
Default:
20
Operation
None