Issue 1.0 VM8000
2 - 18 Features
Direct Announcement Mailbox Routing
(If the outside caller routes directly to the Announcement Mailbox)
47-09-01 Next
Call Routing
Mailbox
47-09-02
Repeat
Count
47-09-03
Hang Up
After
Action
Undefined 0 (No
repeats)
0 = None
1 = Goodbye
2 = Silent
o If the caller doesn’t dial, after the announcement VM8000
InMail hangs up.
o If the caller dials a digit during the announcement, VM8000
InMail says “That is an invalid entry” and hangs up.
1-32 (valid Call
Routing Mailbox)
0 (No
repeats)
0 = None
1 = Goodbye
2 = Silent
o If the caller doesn’t dial, after the announcement they route to
the Next Call Routing Mailbox.
o If the caller dials a digit during the announcement, they route
to the Next Call Routing Mailbox.
o If the caller doesn’t dial, after the announcement VM8000
InMail hangs up.
o If the caller dials a digit during the announcement, they route
to the Next Call Routing Mailbox.
Undefined x (x number
of repeats)
0 = None
1 = Goodbye
2 = Silent
o If caller doesn’t dial, they hear the announcement x number of
times and then VM8000 InMail hangs up.
o If the caller dials a digit during the announcement, VM8000
InMail says “That is an invalid entry” and aborts the
announcement. The announcement repeats (if allowed by the
Repeat Count) and then VM8000 InMail hangs up.
1-32 (valid Call
Routing Mailbox)
x (x number
of repeats)
0 = None
1 = Goodbye
2 = Silent
o If caller doesn’t dial, they hear the announcement x number of
times and then route to the Next Call Routing Mailbox.
o If the caller dials a digit during the announcement, they route
to the Next Call Routing Mailbox.
o If caller doesn’t dial, they hear the announcement x number of
times and then VM8000 InMail hangs up.
o If the caller dials a digit during the announcement, they route
to the Next Call Routing Mailbox.
To Next Page
Loading...
