VM8000 Issue 1.0
InMail System Guide 2 - 19
Routed Announcement Mailbox Routing
(If the outside caller routes to the Announcement Mailbox from a Call Routing Mailbox)
47-09-01 Next
Call Routing
Mailbox
47-09-02
Repeat
Count
47-09-03
Hang Up
After
Action
Undefined 0 (No
repeats)
0 = None
1 = Goodbye
2 = Silent
o If the caller doesn’t dial, after the announcement the caller goes
back to the initial Call Routing Mailbox.
o If the caller dials a digit during the announcement, VM8000 InMail
says “That is an invalid entry” and routes the caller goes back to the
initial Call Routing Mailbox.
o If the caller doesn’t dial, after the announcement VM8000 InMail
hangs up.
o If the caller dials a digit during the announcement, VM8000 InMail
says “That is an invalid entry” and hangs up.
1-32 (valid
Call Routing
Mailbox)
0 (No
repeats)
0 = None
1 = Goodbye
2 = Silent
o If the caller doesn’t dial, after the announcement they route to the
Next Call Routing Mailbox.
o If the caller dials a digit during the announcement, they route to the
Next Call Routing Mailbox.
o If the caller doesn’t dial, after the announcement VM8000 InMail
hangs up.
o If the caller dials a digit during the announcement, they route to the
Next Call Routing Mailbox.
Undefined x (x number
of repeats)
0 = None
1 = Goodbye
2 = Silent
o If caller doesn’t dial, they hear the announcement x number of times
and then go back to the initial Call Routing Mailbox.
o If the caller dials a digit during the announcement, VM8000 InMail
says “That is an invalid entry” and aborts the announcement. The
announcement repeats (if allowed by the Repeat Count) and then
VM8000 InMail routes back to the initial Call Routing Mailbox.
o If caller doesn’t dial, they hear the announcement x number of times
and then VM8000 InMail hangs up.
o If the caller dials a digit during the announcement, VM8000 InMail
says “That is an invalid entry” and aborts the announcement. The
announcement repeats (if allowed by the Repeat Count) and then
VM8000 InMail hangs up.
1-32 (valid
Call Routing
Mailbox)
x (x number
of repeats)
0 = None
1 = Goodbye
2 = Silent
o If caller doesn’t dial, they hear the announcement x number of times
and then route to the Next Call Routing Mailbox.
o If the caller dials a digit during the announcement, they route to the
Next Call Routing Mailbox.
o If caller doesn’t dial, they hear the announcement x number of times
and then VM8000 InMail hangs up.
o If the caller dials a digit during the announcement, they route to the
Next Call Routing Mailbox.