SIP Trunk Programming Guide 1
Configuring NEC SV9300 for SIP Trunking
SECTION 1 NEC SV9300 SETUP GUIDE
1.1 This Guide and Related Documents
This guide was created to assist knowledgeable vendors with configuring the
NEC SV9300 Communication Server and a SIP Trunking service. It provides
sample entries for the required fields. The actual data is provided by your SIP
trunk provider when service is activated. Questions about software and hardware
installation or other PBX configuration issues should be directed to NEC’s
National Technical Assistance Center (NTAC).
For complete details on using SIP trunks with the SV9300, refer to the SV9300
System Manual.
For complete details on using DID features, refer to the DID feature in the SV9300
Features and Specifications Manual.
For details about related hardware, refer to the SV9300 System Hardware
Manual.
These manuals can be downloaded from NEC’s National Technical Assistance
Center (NTAC) web site. You must have a valid dealer ID to access the
documents.
1.2 SIP Trunk Account Information
Contact your SIP trunk provider representative.
This guide is intended for Legacy Time Warner Cable Business Class Communications
Platform.
1.3 SV9300 System Software
The SV9300 requires system software V3.2.1 or higher.
To Next Page
Loading...
