Issue 1.0
SIP Trunk Programming Guide 33
3. Click Apply.
1. Select station SIP Trunk LCR Pattern No. and click Read to get the
current data settings.
2. FD=176 Select 15 to follow CM 8A5xxx>186 setting.
3. FD=183 Select 00 to send calling party name.
4. FD=186 Select calling party number sending option.
5. Click Apply.
Command Line Example:
CM 15400>15>7 (Default: Caller ID Number on Upper Line/Name on Middle Line)
Figure 28 CM 8A LCR Development Table – Caller ID Display (continued)
Command Line Example:
CM 8A5000>176>15 (Default: Follow CM 8Axxx>186 Setting)
CM 8A5000>183>00 (Send Calling Party Name Assigned to CM77 Y=1)
CM 8A5000>186>03 (Send Calling Party Number Assigned to CM12 YY=51)
To Next Page
Loading...
