Issue 1.0 Spectrum Enterprise
28 SIP Trunk Programming Guide
3.11 DID Digit Conversion Settings
All values shown are for example purposes only. Your actual values will be
determined by your implementation team.
1. Select the Trunk Route Number assigned to voice channels and click the
Read button to get current data settings.
2. YYY=170 Select 0 to use DID Development Table 1.
YYY=171 Select the number of digits to be converted.
YYY=172 Select the number of digits received.
3. Click Apply.
Figure 22 CM 35 YYY=170~172 DID Digit Conversion Settings
Command Line Example:
CM 35170>01>0 (DID Development Table 1)
CM 35171>01>15 (Default: 04 Digits
CM 35172>01>15 (Default: 04 Digits
To Next Page
Loading...
