Issue 1.0 Spectrum Enterprise
20 SIP Trunk Programming Guide
1. Select CCH assigned to SIP trunk and click the Read button to get
current data settings.
2. YY=71 Select an unused SIP Trunk Profile Number.
3. YY=77 Select this to send a manual registration.
This setting is not applicable for this carrier test leave at default.
4. YY=78 Select Unit No. accommodating SIP trunk channels.
5. Click Apply.
Figure 15 CM A7 SIP Trunk Control Channel Settings (continued)
Command Line Example:
CM A771>01>00 (SIP Trunk Profile 00)
CM A777>01>0 (Sends a manual registration)
CM A778>01>01 (Main Site Unit 01)
To Next Page
Loading...
