NEC Univerge SV9300 - Figure 12 CM 35 SIP Trunk Route Settings (Continued)

Issue 1.0
SIP Trunk Programming Guide 17
1. Select the Trunk Route Number assigned to voice channels and click
the Read button to get current data settings.
2. YYY=161 Enter DiffServ code in hexadecimal for SIP trunk voice
packets (RTP stream).
Example: 2E = Expedited Forwarding
3. Click Apply.
Figure 12 CM 35 SIP Trunk Route Settings (continued)
Command Line Example:
CM 35161>01>2E (SIP Trunk Route Data: SIP Control QoS DiffServ EF)