Issue 1.0 Spectrum Enterprise
12 SIP Trunk Programming Guide
3.5 SIP Trunk Port Settings
All values shown are for example purposes only. Your actual values will be
determined by your implementation team.
1. Select each Voice Channel and click the Read button to get the current
data settings.
2. YY=00 Assign the same Trunk Route Number to each voice channel.
If multiple SIP trunk servers are in service, separate routes must be used for
each server.
3. Click Apply.
Figure 7 CM 30 SIP Trunk Port Settings
Command Line Example: Route 01
CM 3000>001>01 (Voice Trunk Route Number 01)
CM 3000>002>01 (Voice Trunk Route Number 01)
CM 3000>003>01 (Voice Trunk Route Number 01)
CM 3000>004>01 (Voice Trunk Route Number 01)
To Next Page
Loading...
