Issue 1.0
SIP Trunk Programming Guide 21
3.9 SIP Trunk Destination Point Code Settings
All values shown are for example purposes only. Your actual values will be
determined by your implementation team.
1. Enter Destination Point Code assigned by CMA7 YY=02 and click the
Read button to get current data settings.
2. Y=0 Select CCH assigned to destination point code in CMA7 YY=02.
3. Click Apply.
Figure 16 CM A8 SIP Trunk Destination Point Code Settings
Command Line Example:
CM A80>00401>01 (Destination Point Code 00401 & CCH 01)
To Next Page
Loading...
