Issue 1.0 Spectrum Enterprise
32 SIP Trunk Programming Guide
1. Click the Read button to get the current settings.
2. FD=603 Select 0 to provide Caller ID display.
3. Click Apply.
1. Select station Service Restriction Class A and click Read to get the
current data settings.
2. YYY=400 Select 1 or 7 to display both name and number
simultaneously.
Figure 26 CM 08 Basic Services – Caller ID Display (continued)
Command Line Example:
CM 08>603>0 (Caller ID Display on Analog Terminal)
Figure 27 CM 15 Service Restriction Class A – Caller ID Display (continued)
To Next Page
Loading...
