Issue 1.0 Spectrum Enterprise
14 SIP Trunk Programming Guide
3.6 SIP Trunk Route Settings
All values shown are for example purposes only. Your actual values will be
determined by your implementation team.
1. Select the Trunk Route Number assigned to voice channels and click
the Read button to get current data settings.
2. YYY=000 Select 00 for SIP trunk service.
3. YYY=004 Select 2 for SIP trunk service.
4. YYY=009 Select 03 for SIP trunk service.
5. Click Apply.
Figure 9 CM 35 SIP Trunk Route Settings
Command Line Example:
CM 35000>01>00 (SIP Trunk Route Data: Provide SIP Service)
CM 35004>01>2 (SIP Trunk Route Data: Provide SIP Service)
CM 35009>01>03 (SIP Trunk Route Data: Provide SIP Service)
To Next Page
Loading...
