NEC Univerge SV9300 - TO SET ILLUMINATION PATTERN FOR CALL INDICATOR LAMP; TO ENABLE;DISABLE RTP ALARM

Issue 1.0
SIP Trunk Programming Guide 31
3.12 Caller ID Display
All values shown are for example purposes only. Your actual values will be
determined by your implementation team.
1. Click the Read button to get the current settings.
2. FD=379 Select 1 to provide Caller ID display.
3. Click Apply.
Figure 25 CM 08 Basic Services – Caller ID Display
Command Line Example:
CM 08>379>1 (Default: Provide Caller ID Display)