NEC Univerge SV9300 - TERMINAL SETUP; ADJUSTING VOLUMES; TO ADJUST LCD CONTRAST; TO SET RINGING OF HEADSET

Issue 1.0
SIP Trunk Programming Guide 29
1. Enter DID digits to be converted and click the Read button to get current
data settings.
2. Enter DID conversion block number.
3. Click Apply.
Figure 23 CM 7690 DID Digit Conversion Settings (continued)
Command Line Example: DID 214-555-4567
CM 7690>4567>000 (DID 214-555-4567/Conversion Block 000)