Issue 1.0
SIP Trunk Programming Guide 13
1. Select each Voice Channel and click the Read button to get the current
data settings.
2. YY=35 Assign CIC number to each voice trunk.
CICs should be assigned in order of voice trunks (i.e. trunk 001= CIC 001,
trunk 002=CIC 002 …).
For each SIP trunk server CICs will start at 001 (i.e. SIP trunk server 1 uses
CICs 001, 002, … and SIP trunk server 2 will use CICs 001, 002, …).
3. Click Apply.
Figure 8 CM 30 SIP Trunk Port Settings (continued)
Command Line Example:
CM 3035>001>001 (Assign CIC to Channel 1)
CM 3035>002>002 (Assign CIC to Channel 2)
CM 3035>003>003 (Assign CIC to Channel 3)
CM 3035>004>004 (Assign CIC to Channel 4)
To Next Page
Loading...
