Issue 1.0
SIP Trunk Programming Guide 27
1. Select SIP Trunk Profile Number assigned by CM35 YYY=091 and
click the Read button to get current data settings.
2. YY=117 Set + digit addition/deletion dialing.
3. YY=119 Only set when using T.38 faxing.
4. YY=121~123 Set desired CODEC list when using programmable list.
(CM BA YY=21)
5. YY=126 Select 0 to receive CID from the username field if the display
name field is blank in the initial invite.
6. YY=135 Select 0 to receive called party number from the ‘to header’ SIP
invite. Change only if requested, otherwise leave at default.
This setting is not applicable for this carrier test leave at default.
7. Click Apply.
Command Line Example:
CM BA117>00>1 Set + digit addition/deletion dialing (Default: Not provided
CM BA119>00>NONE (Default: G.711 Pass-Through Fax. Only set
when using T.38 Fax)
CM BA121>00>NONE (CODEC List First Priority: G.711)
CM BA122>00>NONE (CODEC List First Priority: G.729a)
CM BA126>00>0 (Receiving Caller ID Reference)
CM BA135>00>1 (Called Number Reference Location)
To Next Page
Loading...
