NEC Univerge SV9300 - TO BACKUP THE SETTING DATA OF TERMINAL

Issue 1.0 Spectrum Enterprise
36 SIP Trunk Programming Guide
Command Line Example:
CM 0B101>00>172.24.142.55 (Unit 01 VoIP Address)
CM 0B101>01>255.255.255.0 (Unit 01 VoIP Subnet)
CM 0B101>02>172.24.142.1 (Unit 01 VoIP Default GW)
CM 0B101>10>NONE (Default: Location 00)
CM 0B101>36>NONE (Default: SIP Trunk Port 5060)
CM 0B101>60>151.164.1.8 (Unit 01 Primary DNS Server Address)
CM 0B101>61>151.164.11.201 (Unit 01 Secondary DNS Server Address)
CM 0B101>70>66.137.132.162 (Unit 01 Global IP Address)
CM 0B201>00>172.24.142.56 (Unit 01 VoIP IPPAD Address)
CM 0B101>10>32 (Unit 01 VoIP IPPAD Channels)
CM 0B101>50>1 (Unit 01 Allow Fax over IP)
CM 1003>01000>D001 (Unit 01 SIP Trunk Channel 1)
CM 1003>01001>D002 (Unit 01 SIP Trunk Channel 2)
CM 1003>01002>D003 (Unit 01 SIP Trunk Channel 3)
CM 1003>01003>D004 (Unit 01 SIP Trunk Channel 4)
CM 3000>001>01 (Voice Trunk Route Number 01)
CM 3000>002>01 (Voice Trunk Route Number 01)
CM 3000>003>01 (Voice Trunk Route Number 01)
CM 3000>004>01 (Voice Trunk Route Number 01)
CM 3035>001>001 (Assign CIC to Channel 1)
CM 3035>002>002 (Assign CIC to Channel 2)
CM 3035>003>003 (Assign CIC to Channel 3)
CM 3035>004>004 (Assign CIC to Channel 4)
CM 35000>01>00 (SIP Trunk Route Data: Provide SIP Service)
CM 35004>01>2 (SIP Trunk Route Data: Provide SIP Service)
CM 35009>01>03 (SIP Trunk Route Data: Provide SIP Service)
CM 35018>01>0 (SIP Trunk Route Data: Provide DID Digit Conversion)
CM 35020>01>00 (SIP Trunk Route Data: Provide SIP Service)
CM 35090>01>0 (SIP Trunk Route Data: Provide SIP Service)
CM 35091>01>01 (SIP Trunk Route Data: Assign CCH Number)
CM 35161>01>2E (SIP Trunk Route Data: SIP Control QoS DiffServ EF)
CM 35170>01>0 (DID Development Table 1)
CM 35171>01>15 (Default: 04 Digits)
CM 35172>01>15 (Default: 04 Digits)
CM 360>0101>0 (Route to Route Connection)
CM A701>01>00400 (Arbitrary Origination Point Code)
CM A702>01>00401 (Arbitrary Destination Point Code)
CM A771>01>00 (Assign SIP Trunk Profile Number)
CM A778>01>01 (Assign SV9300 Unit Number with SIP Trunk Channels)